Specifications

Welcome to the HMS Decorative Surfacing ‘How To Specify’ area. This area has been designed primarily for professional and commercial clients to give details on how to access further technical and safety related information in regards to our products and services.

Below are links to PDF documents containing the specification and build-up for our Resin Bonded Decra®Stone, Resin Bound Decra®Set surface dressing products and TreePit. These can be downloaded, saved and printed on your own devices.

For further technical information on any of our products and services, please do not hesitate to contact us through the contacts page on the website, or by either of the following methods:

 

HMS Decra®Stone

Decra®Stone non-porous resin bonded decorative surface dressing comprising of two-pack odourless epoxy based binder (suitable for pigmentation) and hand-laid decorative aggregate of nominally 1-5mm grade, available in a variety of colours and finishes. To be laid on close graded asphaltic or tarmac wearing course or suitably primed sound concrete. Overall depth approximately 6mm.

Click HERE to view and download the PDF Specification Document for Decra®Stone  

HMS Decra®Set

Decra®Set porous resin bound decorative surface dressing comprising clear UV stable polyurethane binder and nominally 3-6mm or 6-10mm hand-laid decorative aggregate in a variety of colours and finishes. Decra™Set is laid at an average depth of 15-22mm depending on its location and intended use. Decra™Set can be laid to open textured asphalt, tarmac or concrete surfaces, or other free-draining base courses. No loss of aggregate. Finished with translucent sand for slip resistance. SUDS compliant.

Click HERE to view and download the PDF Specification Document for Decra®Set 

HMS TreePit™

HMS TreePit™ resin bound decorative surfacing system comprising clear UV stable polyurethane binder and nominally 6-10mm hand-laid decorative aggregate in a variety of colours and finishes. HMS TreePit™ is laid at an average depth of 40-75mm at the base of trees to allow for water and air to circulate. No loss of aggregate. Finished with translucent sand for slip resistance. Compatible with tree root watering systems. SUDS Compliant.

Click HERE to view and download the PDF Specification Document for TreePit™